MPAS-B60302-V20S2A

The MPAS-B60302-V20S2A linear actuator is a linear actuator that is widely used in industries to create a linear motion. This kind of unit typically converts rotational motion into the linear motion that is required by certain applications. This actuator has been launched by Allen-Bradley/Rockwell Automation as a machine motion solution in the control industry. Actuators are widely used in pulling and injection applications. When it comes to the installation and mounting of the Allen-Bradley/Rockwell Automation MPAS-B60302-V20S2A linear actuator, it is recommended to install the actuator in a place with high visibility in order for the users to be able to perform visual inspections to determine whether the actuator is operating in good condition and in a good position or not. It is also recommended to mount the actuator away from different equipment that releases heat.

Clearances must also be left around the MPAS-B60302-V20S2A linear actuator in order to promote ventilation and the ambient air temperature must not exceed 40 degrees Celsius in order to maintain a safe environment for all the equipment involved in operations, including the actuator. At this temperature, the humidity levels must be maintained under 80% without condensation. The MPAS-B60302-V20S2A linear actuator operates with a voltage of 400 Volts, one of the highest voltages of the series. Its mechanical drive type is a ballscrew. By having this type of mechanical configuration, the actuator might need a maintenance routine every 3 months in order to ensure that all the parts are working well and at the same time to service the actuator by cleaning and lubricating it.