The MPAS-B9068L-ALMS2C linear actuator is an MPAS series integrated linear actuator that has been distributed by Allen-Bradley/Rockwell Automation. Linear actuators are widely used in different industries to convert a rotational movement into a linear movement. Allen-Bradley has designed these parts to provide the best motion solution to the automation industry. The Allen-Bradley/Rockwell Automation MPAS-B9068L-ALMS2C MPAS series integrated linear actuator comes designed with a full voltage rating of 400 Volts. Its operating mechanism consists of a direct drive, with the ability to run at up to 5 meters per second. This linear stage comes with a full setup and its programming can be performed through the RSLogix 5000 software (version 20 or earlier). This means that the actuator can be fully programmed and automated in order to comply with any requirements from any application within the control industry.

The Allen-Bradley/Rockwell Automation MPAS-B9068L-ALMS2C MPAS series integrated linear actuator can be mounted in 3 different ways, in an inverted way on the ceiling, in a vertical or inclined way, or in a horizontal way. All 3 of the mounting methods need to be done on a flat surface since the actuator needs to be properly aligned in order to fulfill its purpose. The Allen-Bradley/Rockwell Automation MPAS-B9068L-ALMS2C MPAS series integrated linear actuator does not require any cooling unit around it. It only needs to be mounted with sufficient clearances around it so that the actuator can release heat and ventilate. This linear actuator can operate at a maximum temperature of 40 degrees Celsius.