22F-D4P2N113

The 22F-D4P2N113 is an Allen-Bradley manufactured Variable Frequency Drive that is part of the PowerFlex 4M Adjustable Frequency AC Drive. This drive is a compact and scalable unit that is capable of Volts / Hertz (V/Hz) control, ideal for implementing modulating speed control of industrial AC motors. The 22F-D4P2N113 is designed to accept an incoming line voltage of 380-480 VAC, 3-Phase along with an input current of 5.0 Amperes and real power input of 6.0 kVA while the output ratings of the drive are 0-460 VAC, 3-Phase, output programmable frequency of 0-400 Hz, the output power of 2.0 HP (1.5 kW) and motor applicable current of 4.2 Amperes. This drive is also installed with a fixed keypad and LCD readout, allowing operators to configure, monitor, and control the drive locally. It also comes with an EMC filter that is used to provide noise immunity in the voltage incomer line. Optional Integrated Insulated Gate Bipolar Transistor (IGBT) braking mechanism to implement dynamic braking and prevent DC bus voltage error during a sudden stoppage of the motor may also be installed to this drive. The communication interface available to the 22F-D4P2N113 is a single RS485 communication port that supports Modbus Remote Terminal Unit (RTU) protocol and Drive Serial Interface (DSI). Optional communication interface modules that may be added to this drive are DeviceNet, EtherNet/IP, PROFIBUS DP, LonWorks, BACnet, and ControlNet interface modules.

The Allen-Bradley 22F-D4P2N113 is a PowerFlex 4M A-frame, air-cooled 3-phase low voltage drive that is equipped with an integral S Type EMC filter. It comes with a 4-digit digital display screen, an integral digital keypad, and with 10 LED status indicators. It does not have a brake IGBT, but it does not have an internal brake transistor that can brake dynamically with its simple and economical brake resistors. Also included on the 22F-D4P2N113 drive are several modules, namely a DSI Wireless Interface Module (WIM), an RS-485/DSI module equal to the Modbus RTU module, and a serial converter module. It has an enclosure rating of IP20 NEMA, open type and it can be panel or DIN-rail mounted. The input voltage of the 22F-D4P2N113 drive is 480V and its line frequency is 50-60 Hz. The input ratings are 340-528 voltage range, 5 kVA, and 6 Amps, while its output ratings are 1.5 kW, 2 HP, and 4.2 A. This drive’s power factor is 0.98. The relay contact resistive ratings of the 22F-D4P2N113 are 3 A at 30V DC or 125-240V AC, while its inductive ratings are 30V DC or 125-240V AC. It has a non-operating temperature range of -40-185 Deg. F, a maximum operating altitude of 1000 m or 3300 ft without derating, and a non-condensing relative humidity range of 0-95%. This drive also has a 15 g peak operating shock for 11 ms, as well as a 1 g peak operating vibration at 5-2000 Hz. It measures approximately 6.85 x 36.94 x 5.35 inches.