20AB6P8A3AYNANC0

The 20AB6P8A3AYNANC0 is a variable speed drive from Allen-Bradley. The drive protects itself from overloads or overcurrents by either instantly resetting a fault once the output current exceeds a set value, or the drive may also fault when currents never reach the set limit but are sustained for longer periods and are likely to cause damages to the drive. Additionally, the 20AB6P8A3AYNANC0 may choose to protect itself from overloads and overcurrent by folding back the output voltage and frequency if the output voltage is more than a previously programmed value. The 20AB6P8A3AYNANC0 also guards itself against heatsink overheating by constantly monitoring the heatsink temperature. When the temperature reaches the maximum level allowed by the 20AB6P8A3AYNANC0, the drive resets a fault.

The 20AB6P8A3AYNANC0 is part of the Allen-Bradley PowerFlex series of variable speed drives. Drives in this series can employ a Datalink mechanism to facilitate the data transfer between a drive and a programmable controller. Using a Datalink mechanism eliminates the need for using explicit messaging or block transfer mechanisms to transfer data. Note that a Datalink occupies two 16 or 32-bit words in the input image table and the output image table. The Allen-Bradley 20AB6P8A3AYNANC0 has its current rated at 6.8 Amps and its Horsepower capped at 2.0 Horsepower. The drive’s apparent power and voltage stand at 1.5 kilowatts and 240 Volts AC, respectively. For the power supply, the 20AB6P8A3AYNANC0 is powered by a 3-phase power supply with 6 cycles and a frequency of 60 Hertz. The drive supports an enhanced control for its inputs and outputs.