20AC011A0AYNACNN

The Allen-Bradley 20AC011A0AYNACNN is an AC drive with an integrated ControlNet interface. It is part of PowerFlex 70 series from Allen-Bradley which features configurable output frequencies. The 20AC011A0AYNACNN has the following output specifications: 5.5 kilowatts (7.5 Horsepower), 11.5 Amps of current with 3-phase input and 5.8 Amps of current with single-phase input. The input specifications are 400 Volts AC, 10.5 Amps/7.6 kVA with 3-phase input and 11 Amps/3.8 kVA with single-phase input. The integrated ControlNet interface on the 20AC011A0AYNACNN interfaces with coaxial cables. The drive features an integrated brake IGBT. An integrated HMI and brake resistor are not available. However, optional modules for an HMI (catalog code: 20-HIM-A3) and a brake resistor (catalog code: 20AD-DB1-C) can be ordered from Allen-Bradley. The 20AC011A0AYNACNN supports standard control.

The terminal blocks supported by the 20AC011A0AYNACNN include I/O (for signal and control), power (for input power and motor connections) and SHLD (for wiring shields). The recommended wire sizes for I/Os are from 16 to 30 AWG and for power terminal blocks are from 12 to 22 AWG. The C frame 20AC011A0AYNACNN has 6.8 kilograms of weight. The enclosure dimensions are 300 millimeters in height, 185 millimeters in width, and 180 millimeters in depth. The panel-mountable drive should be installed vertically with 76 millimeters of vertical separation to allow for airflow around the drive. The 20AC011A0AYNACNN supports the following integrated protective features ground fault protection, 6 kilovolts transient protection, and electronic motor overload protection. The drive also features a removable MOV-to-ground and common-mode-capacitors-to-ground which help in the verification of compatibility with ungrounded systems.