20AC011A0AYNADCN

The Allen-Bradley 20AC011A0AYNADCN is a PowerFlex 70 AC drive with adjustable-frequency support. It is designed to operate at an input voltage of 400 Volts AC. The output of the 20AC011A0AYNADCN is rated at 5.5 kilowatts and 7.5 Horsepower. The 3-phase ratings for the drive input are 10.5 Amps, 7.6 kVA, and 400 Volts AC.  The output current rating is 11.5 Amps with 3-phase input. The minimum and maximum times for the dual element time-delay fuse are 15 and 25 seconds, respectively. The minimum and maximum times for the non-time delay fuse are 15 and 45 seconds, respectively. The circuit breaker rating is 40 Amps. The available options for the motor protector are the 140M-C2E-C16, 140M-D8E-C16, and the 140M-F8E-C16. The single-phase ratings for the drive input are 11 Amps, 3.8 kVA, and 400 Volts AC. The output current rating is 5.8 Amps when single-phase voltage is applied at the input.

The DeviceNet interface, brake IGBT, and the user manual are part of the 20AC011A0AYNADCN package. Enhanced control is supported by the 20AC011A0AYNADCN. If the “safe control-off” feature is required, then the DriveGuard Safe Torque off-board (catalog number 20A-DG01) will need to be ordered. An integrated human-machine interface and internal brake resistor are not available. However, optional modules for both are available from the manufacturer. The IP20-rated 20AC011A0AYNADCN is available in a C frame enclosure. It weighs 15 pounds and it measures 300 x 195 x 179 millimeters. To obtain performance levels as per specifications, the drive should be operated in an environment free from corrosive gases and vapors and where the relative humidity is maintained between 0 and 95%.