20AC015A0AYNANCN

The 20AC015A0AYNANCN is an AC drive for 3-phase motors manufactured by Allen-Bradley. It is applicable to 3-phase motors rated at up to 7.5 kW. Note that this device cannot be installed in systems as a “general power supply” to control machines. It is exclusively made as a motor speed controller.  Do not misuse the device because this can lead to equipment or AC drive failure. The whole purpose behind the 20AC015A0AYNANCN is to match the required speeds that are necessary for industrial process applications. These process applications could vary from HVAC, conveying system, fans, spindles on machining centers, and many other devices that are often seen in industrial environments. This is a PowerFlex 70 module that is equipped with the acceleration time setting feature and with stop dwell time configuration.

The 20AC015A0AYNANCN has advanced parameters such as setting a delay time between recognizing zero speed and disabling the speed and torque controllers. Its internal memory is backed up with a battery, so the drive has the capability to retain counters, alarms, and settings when the power is down. The Allen-Bradley 20AC015A0AYNANCN has a zero-stacking installation option that can save space in an electrical cabinet and make it streamlined. The drive utilizes the Integral and Proportional gains to be able to adjust the speed in the finest way. The 20AC015A0AYNANCN cannot work with voltages greater than 400 Volts AC and it can transfer 15.4 Amps to the motor. It is delivered with the standard PowerFlex 70 line inputs and outputs that are used to perform a signal exchange with other automation devices.