20AC015A3AYNANCN

The 20AC015A3AYNANCN is an AC drive by Allen-Bradley from the PowerFlex 70 series. It has a 3-phase input voltage of 400 Volts AC with a 15.4 Amps rated output current. The drive is 7.5 kW rated, and since 2015, machinery and OEMs using new motors with a rated output power greater than 7.5 kW have been mandatory for the motors to achieve at least the IE3 efficiency class. This is the point where the Allen-Bradley 20AC015A3AYNANCN plays its part well because it is a highly efficient device that saves energy in the system. It is an air-cooled module that must be installed vertically for the cooling system to work efficiently.

The Allen-Bradley 20AC015A3AYNANCN is rated for an IP20 open enclosure which on the front side has an LCD and a numeric keypad as an HMI feature. Its HMI is used for configuration, alarm read-out, and programming. This PowerFlex 70 module has a vector control with FORCE technology and enhanced control with a safe torque-off feature. This module’s frame size is “C” which means that it has a height of 11.8 inches, a width of 7.3 inches, and a depth of 7.1 inches. This module is not equipped with a braking resistor, but it does have IGBT brake and EMC filtering included. The Allen-Bradley 20AC015A3AYNANCN is characterized by a functional temperature range of 32 to 122 degrees Fahrenheit (0 to 50 degrees Celsius), at 5 to 95% relative humidity. The unit delivers exceptional motor control using the Volts/Hertz control and the SVC algorithm which provides outstanding torque even at low motor speeds or speeds close to zero.