20AC022A3AYNAENN

The 20AC022A3AYNAENN is an advanced Allen-Bradley drive with frequency adjusting capabilities. The drive is part of the PowerFlex 70 series and Rockwell Automation. The frequency of this drive can be adjusted as needed and it is also referred to as a VFD (Variable Frequency Drive). This is a 3-phase drive and it runs with a 400 Volts AC power supply and 22 Amps of current. The 20AC022A3AYNAENN drive has a frame D body and it comes with a panel-mounted enclosure which has an IP20 rating. The rating means that the enclosure is not water-resistant. An IGBT braking system is installed in this drive without a braking resistor. This system has proved to be a cost-effective solution because it makes use of regenerative switching energy. The total output power generated by this drive is 15 Horsepower.

On the front face of the 20AC022A3AYNAENN, a full numeric keypad with an LCD is present. This acts as a human-machine interface module. This module is used to enter input to the drive, and to configure, program, and troubleshoot the drive. An Ethernet/IP port is present in this drive for communication. The communication activity can be clearly seen through the LED status indicator on the front side. The drive uses sensorless vector control which can develop a high torque level over a wide speed range and it can adapt to individual motor characteristics. The 20AC022A3AYNAENN has been certified with standard drive certifications including the ABS, EAC, CE, and the RCM. The drive has been manufactured with EMC capabilities and it can be operated in Europe. The drive has a short circuit rating of a maximum of 200,000 Amps. The drive has a current limiting capability. The current limit can be proactively programmed up to 160% of the rated output current. The drive should be operated in a room with a temperature range from 0 to 50 degrees Celsius.