20AC030A0AYNACCN

The Allen-Bradley 20AC030A0AYNACCN is an adjustable frequency AC Drive from the PowerFlex 70 series of drives. It is a 3-phase device supplied with 400 Volts AC that is engineered for indoor use. The 20AC030A0AYNACCN can be mounted in the vertical position either on a wall, on a machine, or inside of an electrical cabinet. Due to its IP20 protection rating, the best location for installation would be an electrical cabinet that is vented and air-cooled.  The item comes in a D frame which has dimensions of 220 millimeters (8.66 inches) by 350 millimeters (13.78 inches) by 180 millimeters (7.08 inches). The AC drive has an output current rating of 30 Amps and it allows the users to select control methods like the FORCE technology, SVC, and the V/Hz control.

The Allen-Bradley 20AC030A0AYNACCN drive has a rating of 20 Horsepower during normal duty operation. The module has a conformal coating and it features the IGBT brake. It is equipped with an internal filter but it does not have a brake resistor as a standard option. Induction-motor-based systems that incorporate the 20AC030A0AYNACCN avoid high in-rush currents at the startup. This is because AC drives start the motor with low voltage and frequency. This also leads to less mechanical wear by eliminating high starting currents, preventing too much torque from building up, and reducing the necessity for throttles, dampers, and louvers. The Allen-Bradley 20AC030A0AYNACCN drive comes with a cooling fan which starts at programmed temperatures that are detected inside the enclosure and when the power is applied. The drive should be installed in surroundings where the maximum temperatures do not exceed 50 degrees Celsius.