20AC030A0AYYANC0

The 20AC030A0AYYANC0 drive is a motor drive that belongs to the PowerFlex 70 series by Allen-Bradley. This specific drive operates with a 3-phase voltage of 400 Volts and a normal duty current rating of 30 Amps with a frequency range of 50 to 60 Hertz. This specific model belongs to the Frame D product line and it comes with an IP 20 rated enclosure. This enclosure has been designed for use in indoor environments only. It can resist up to 50 degrees Celsius of air temperature during operation. This drive can be panel mounted and clearances of at least 3 inches must be left on top of and below the drive to promote ventilation. This drive comes with an adhesive label on top of it. This label must not be removed or the drive will have an open type of enclosure that offers less protection than the IP 20 enclosure.

The Allen-Bradley 20AC030A0AYYANC0 motor drive needs to be connected by using specific types of wires. For power, it is recommended to use a standard wire that is rated for 600 Volts and 90 degrees Celsius. Signal wiring is recommended for standard analog I/O, and for digital I/O, it is recommended to use a shielded wire. These 2 last types of wire need to have a minimum isulation rating of 300 Volts and a temperature rating of 75 to 95 degrees Celsius. The Allen-Bradley 20AC030A0AYYANC0 motor drive does not include a human-machine interface. It comes with a blank cover that provides the space for the installation of an interface module. This drive includes an internal brake resistor with a resistance rating of 62 to 115 ohms. This resistor has a limited duty cycle and for some operations, an additional resistor might be necessary. The Allen-Bradley 20AC030A0AYYANC0 motor drive needs to be grounded to avoid electromagnetic interference during operation.