20AC072A0NYNANN0

The 20AC072A0NYNANN0 is a variable frequency drive. The frequency of the drive can be adjusted to regulate the speed and torque in factory applications. This AC drive has been manufactured by Allen-Bradley. It is a PowerFlex 70 series drive and it is being widely used in industrial areas for controlling different AC motor applications. The 20AC072A0NYNANN0 drive takes electric power from 3-phase line voltage and it uses 72 Amps of current to run. This E-framed chassis can be mounted in different locations using the IP20 rated panel-mounted enclosure. It is a NEMA/UL Type 1 enclosure and it is not water-resistant. The braking system used in this variant is the IGBT, which uses regenerative energy and which has proved to be a cost-effective solution. No braking resistor is present in this AC drive. No communication adapter is present either. The front panel of the drive has a blank cover.

The 20AC072A0NYNANN0 produces a total of 50 Horsepower of output under a normal load. The feedback encoder is missing in this drive. The drive comes with inertia ride-through which offers tripless operation during a prolonged power outage by using the rotating energy stored in high-inertia low-friction loads. The drive supports 3 completely different sets of parameter data which can be individually loaded for different batch processes. The drive uses FORCE Technology with vector control to provide outstanding torque and speed control. The 20AC072A0NYNANN0 can support line transients and control logic noise immunity for showering arc transients of up to 1500 Volts peak. The drive uses a power ride-thru of 15 milliseconds at a full load and it has a logic control ride-thru of 0.5 seconds minimum. This AC drive can withstand vibrations of 0.152 millimeters of displacement. It can also hold shocks of up to 15g peak for 11 milliseconds. The drive installation site should be relatively humid with 5 to 95% non-condensing relative humidity.