20AC072A3AYNACN0

The 20AC072A3AYNACN0 is a type of adjustable speed drive made to control the AC motor speed and torque in electrical and mechanical systems. They can be used in a variety of applications ranging from small applications to large compressors. This PowerFlex 70 drive is a 400 Volts AC unit with a power output of 50 Horsepower under a normal load. The amperage rating for this drive is 72 Amps. The 20AC072A3AYNACN0 uses a NEMA/UL Type 1 panel-mounted enclosure for mounting purposes. The enclosure is not water resistant and it comes with an IP20 rating only. The enclosure is meant for indoor uses only. The frame of the body is an E type of frame and it comes equipped with a human-machine interface module on the front panel of the drive. The module is a numeric keypad with a backlit LCD that is capable of displaying 7 lines and 21 characters at a time. The drive lacks an encoder feedback device and it also lacks the safe torque-off feature.

The 20AC072A3AYNACN0 has been manufactured by following the EMC directives set by the IEEE standards. The drive uses the standard control method for controlling the AC motor. On the front panel of the drive, a human-machine interface module is present for communication with the drive. The module is a fully numeric LCD and it can be used for the configuration and troubleshooting of the drive. The module is very easy to set up and easy to operate. The drive comes with a ton of protective features. The drive can support line transients of up to 6000 Volts peaks per the IEEE standards. The drive comes with PI control that can eliminate the need for a separate process loop controller. The 20AC072A3AYNACN0 comes with various programmable stop modes including the Ramp, Coast, DC-brake, Fast brake, Ramp to hold, and the S-curve stopping mode. The drive is 97.5% efficient.