20AC072A3NYNAEC0

The 20AC072A3NYNAEC0 is an Allen-Bradley PowerFlex 70 series drive. It comes with an amperage rating or an output current rating of 72 Amps. The module features the panel-mounted IP20/NEMA Type 1 enclosure with a conformal coating. The 20AC072A3NYNAEC0 also features an input voltage rating of 400 Volts AC and it is a 3-phase drive. The 20AC072A3NYNAEC0 features the enhanced control with no feedback. It comes with the internal communication module featuring the EtherNet/IP protocol. For the Allen-Bradley drives, the internal communication feature is important for ensuring that the drive achieves fast and efficient control. This also allows the drives to have a fast data exchange process with the host controllers over various interfaces.

The 20AC072A3NYNAEC0 comes with the E frame size and it features the brake IGBT with no brake resistor. It comes with the second environmental filter per the CE EMC directive. The module also features an LCD and it supports a full numeric keypad. The IP20 NEMA or UL Type 1 enclosure helps in ensuring that the drive achieves conventional mounting inside and outside the control cabinet. It also features a conduit plate that is usually vertically removable, ensuring ease of installation and replacement without any disturbances on the conduit. The 20AC072A3NYNAEC0 comes with a fast-acting current limit and the BUS voltage regulation resulting in a maximum acceleration and deceleration without tripping. The 20AC072A3NYNAEC0 also features the flying start, delivering a smooth connection to the rotating loads regardless of the commanded direction. The module also features the PI control, eliminating the need for a separate feedback device. Another important feature on the 20AC072A3NYNAEC0 is the inertia ride-through offering a tripless operation when there is a prolonged power outage. This is through the use of rotating energy stored in the high-inertia low-friction load.