Product image is representative; revision or series may vary. Contact us to request a specific version.
The Allen-Bradley 20AC2P1A0AYNANNN PF70 has a HP ND output rating of 1 HP. Also, this Allen-Bradley/Rockwell Automation adjustable frequency drive is a 2.1 Amp AC drive. This PowerFlex 70 is a 0.75 kilowatt unit, is powered with 400V AC, and has an A frame size. It comes with a standard option. This adjustable frequency drive has a panel mount - IP 20 enclosure.
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
| Manufacturer | Allen Bradley |
|---|---|
| Category | Drives |
| Product Line | PowerFlex 70 |
| Part Number | 20AC2P1A0AYNANNN |
| Weight | 8.00 lbs (3.63 kg) |
| Voltage | 400V AC |
| Ph | 3 |
| Amps | 2.1 |
| kW(Hp) | 0.75 (1.0) |
| Frame | A |
| Enclosure | Panel Mount - IP 20, NEMA/UL Type 1 |
| Interface Module | Blank Cover |
| Type | Manual |
| w/Brake | Yes |
| w/Resistor | No |
| Rating | Filtered A & B Frames (Optional) C, D, & D Frames (Standard) |
| Network Type | None |
| Control | Standard |
| Safe Off | N/A |
| Feedback | No Feedback - Enhanced Control |
| UPC | 662453788760 |
The 20AC2P1A0AYNANNN PowerFlex 70 Adjustable Frequency AC Drive is an Allen-Bradley designed digital AC drive with standard features (control and braking) designed for precise motor control in a variety of applications with needs for speed and torque control. Like every PowerFlex 70 drives, the 20AC2P1A0AYNANNN is designed around a space-saving blueprint from the compact NEMA Type 1 enclosure designed to support zero stacking and conventional panel mounting, to space-saving internal components like a dynamic brake transistor and the EMC class filtering. The 20AC2P1A0AYNANNN has a rating of 2.1 Amps, 1.0 Horsepower at 400 Volts AC (3-phase), and a wide acceptable input range of 360 to 440 Volts AC. It has 0.98 (across the whole speed range) power factor, with an efficiency of 97.5% at rated current and nominal line voltage, and a recommended power ratio of 2:1 (drive to motor). It provides protection against phase-to-phase fault at the output and intermittent voltage spikes of up to 6000 Volts, and it provides BUS overvoltage and under-voltage regulation with current limiting action for maximum operation.
The 20AC2P1A0AYNANNN offers faultless operation even in the event of an unplanned power outage, and it has a factory-installed dynamic braking transistor which provides cost-effective braking. It programmed for standard Volts per Hertz control with full custom capability suitable for simple fan and pump applications, and it uses pulse width modulated (PWM) signal for control. The 20AC2P1A0AYNANNN offers 0.5% regulation (open-loop) using “slip compensation”, and it provides output voltage control with accuracy within ±0.01% of the set output frequency. It offers 110% normal duty overload capacity for 60 seconds, with Class 10 motor overload protection, and it also offers 2 separately programmed acceleration and deceleration times. The 20AC2P1A0AYNANNN has a designated temperature range of 50 degrees Celsius, and it is designed for use at a 5 to 95% non-condensing relative humidity range. It is cUL-us, CE, RCM, and ABS certified, and it weighs approximately 2.71 kilograms.
| Revision Part # | Also known as | |
|---|---|---|
| 20AC2P1A0AYNANNN Ser A | 20AC2P1A0AYNANNN/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
This Allen Bradley PowerFlex 70 is a 0.75 (1.0) kW(Hp) AC Drive. This PF 70 comes with Standard Control, a Blank Cover, and w/Brake. This AB VFD is Frame size A and powered with 400V AC 3 Phase and 3 Amps.
| Width (w/Mounting Hardware) | 4.82 in. (122.4 mm) |
|---|---|
| Height (w/Mounting Hardware) | 8.89 in. (225.7 mm) |
| Depth | 7.08 in. (179.8 mm) |
| Mounting Bracket Hole Width | 3.71 in. (94.2 mm) |
| Mounting Bracket Hole Height | 8.33 in. (211.6 mm) |
| Mounting Hole Diameter | 0.23 in. (5.8 mm) |
| Weight | 6.0 lb (2.71 kg) |