20AC8P7F3AYNNNC0

The Allen-Bradley/Rockwell Automation 20AC8P7F3AYNNNC0 is an 8.7 Amps user-adjustable speed drive. The drive has a type B frame size and a Horsepower rating of 5.0 Horsepower at normal duty. The 20AC8P7F3AYNNNC0 supports a voltage with a frequency of 50 Hertz. The drive’s enclosure supports flange mounting where the front chassis has an international protection rating of IP20 while the heatsink has an IP66 international protection. An IP20 rating means that the front chassis is protected against small objects while an IP66 rating shows that the heatsink on the 20AC8P7F3AYNNNC0 is completely sealed off from dust and from temporary flooding of water or other fluids. An IP66 rated device can be used in factory sections that are periodically invaded by water.

The Rockwell Automation 20AC8P7F3AYNNNC0 features an LCD plus a numeric keypad. The keypad is used to adjust the drive’s parameters so that the drive perfectly drives a motor which in turn runs an application. The LCD, apart from aiding in the parameter adjustment process, provides a visual way to monitor how the 20AC8P7F3AYNNNC0 is responding to external forces such as the external control devices interfaced with it. To simplify the process of setting up the drive, a manual is shipped along with the drive. The manual also acts as a quick reference point, especially when troubleshooting the 20AC8P7F3AYNNNC0. The Allen-Bradley 20AC8P7F3AYNNNC0 does not feature a pre-installed communication interface. Therefore, communications to and from the drive are carried out using the onboard terminal block. Also, the 20AC8P7F3AYNNNC0 does not feature pre-installed feedback encoder or an internal brake resistor.