20AD011A0AYNACC0

The Allen-Bradley 20AD011A0AYNACC0 is an AC drive for 3-phase motor speed control. Its vector control capabilities are designed and developed by Rockwell Automation to enable the users to quickly configure and implement the speed and torque control of their 3-phase motors in various industrial applications. The Allen-Bradley 20AD011A0AYNACC0 employs standard control solutions like the FVC control, SVC, and the Volt per Hertz motor control, but it also implements enhanced control which can expand its output frequency range from 0 to 400 Hertz to 0 to 500 Hertz. For output signal generation, this module uses a sine coded PWM, with a 2 to 12 KHz frequency carrier which is programmable.

The Allen-Bradley 20AD011A0AYNACC0 AC drive has a factory-installed heatsink thermistor which sends the microprocessor information about the high-temperature state. There are many protective features like a digitally-controlled overcurrent trip which can be programmed from 20 to 160% of the drive’s nominal current. It has a ground fault trip protection and a transient line protection of up to 6000 Volts. The Allen-Bradley 20AD011A0AYNACC0 has a blank plastic cover instead of an HMI unit. It supports ControlNet communication over a pre-installed module. Particles emission from this device is controlled with a filter. The item has a net weight of 6.9 kilograms (15.2 pounds) and approximate dimensions of 300 millimeters x 185 millimeters x 180 millimeters. Do not install the drive horizontally, because this will reduce its cooling capacity and it may lead to frequent overheating and the damaging of the device. The module is designed to meet the requirements for manufacturing adjustable speed electrical power drive systems.