Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD011A0AYNACG0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD011A0AYNACG0

|
Need a Specific Revision?

The 20AD011A0AYNACG0 drive is a Series A variable frequency drive by Allen-Bradley. It has a voltage rating of 480 Volts AC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD011A0AYNACG0

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD011A0AYNACG0
Weight12.00 lbs (5.44 kg)
DescriptionVariable Frequency drive
Voltage480 Volts AC
SeriesA
Phase3
Current11.5 Amperes
Safe Torque OffYes
StandardsABS, C-Tick, EN, NSF, etc
CommunicationControlNet
BrakingIGBT
HIMBlank cover
Horsepower7.5 HP
Request a Repair

The 20AD011A0AYNACG0 drive is a microprocessor-controlled drive. This 3-phase drive runs with a voltage rating of 480 Volts AC and a current of 11.5 Amps. The drive follows the common industry protocol and it uses the ControlNet protocol for internal communication. This protocol supports flexible fault configuration. The adapters can be programmed to take actions based on faults, user-configurable logic control, and speed reference values. The 20AD011A0AYNACG0 drive uses the safe torque-off feature to ensure that rotational energy to the motor is prevented by using a safety circuit with the drive's power switching signals. A droop control feature is available in the drive for load-sharing applications. The fast-acting current limit and bus voltage regulation in the drive ensures that maximum acceleration and deceleration is achieved without the drive getting tripped. The front panel of the drive has a blank plate. No human-machine interface module is present in this drive variant.

The 20AD011A0AYNACG0 drive is meant to be used for indoor purposes only. It should be protected against water sprays in all directions. The drive meets standards like the ABS, C-Tick, EN, NSF, and others. The 20AD011A0AYNACG0 drive introduces dynamic braking through the use of IGBT braking. The drive is equipped with a reactor to protect it from AC line disturbances. Furthermore, it comes with ground fault protection, which checks the reliability of the drive. The 20AD011A0AYNACG0 drive uses a microprocessor-controlled thermistor to monitor the overtemperature inside the drive. A cooling fan is present to bring down the ambient temperature.