20AD011A0AYNANG0

The 20AD011A0AYNANG0 is a PowerFlex 70 AC drive manufactured by Allen-Bradley. The Allen-Bradley 20AD011A0AYNANG0 AC Drive belongs to Series A of the Allen-Bradley PowerFlex 70 AC drives. The Allen-Bradley 20AD011A0AYNANG0 AC Drive operates with 11 Amps of current rating, 5.5 kW of output, 480 Volts AC voltage, 3 operating phases, enhanced control and a blank cover interface module. The Allen-Bradley 20AD011A0AYNANG0 AC Drive is contained in NEMA Type 1 Enclosure rating. The Allen-Bradley 20AD011A0AYNANG0 AC Drive settings can be viewed by utilizing a human-machine interface module, a personal computer, or the Allen-Bradley 20AD011A0AYNANG0 AC drive equipment. The condition of the Allen-Bradley 20AD011A0AYNANG0 AC Drive and the DriveLogix control is often monitored, and any slight changes that will occur, it will be indicated through the human-machine interface module or the front-panel LEDs. The status indicators become visible when the Allen-Bradley 20AD011A0AYNANG0 AC Drive door is open.

The Allen-Bradley 20AD011A0AYNANG0 AC Drive provides suitable services and compatibility for IP networks, DeviceNet, and ControlNet; also the Allen-Bradley 20AD011A0AYNANG0 AC Drive is applicable for use with the Internet-Bus, Profibus, Universal Remote I/O, and RS-485 DFI devices. The Allen-Bradley 20AD011A0AYNANG0 AC Drive is normally programmed to lower voltage to attain the desired higher currents and feature a dual current rating, one current rating is for normal operation, and the second one is for heavy operation applications. Local control configuration helps in programming, starting, speed stopping, and emergency stop operations. The Allen-Bradley 20AD011A0AYNANG0 AC Drive is equipped with an adhesive label located at the top of the Allen-Bradley 20AD011A0AYNANG0 AC Drive. If the operator removes the adhesive label, the Allen-Bradley 20AD011A0AYNANG0 AC Drive should be mounted in an enclosure that has 0.04-inch top openings and 0.5-inch side openings to operate within the LV directive compliance. The operator is recommended to utilize a motor cable which is relatively short to prevent capacitive currents and electromagnetic emissions.