20AD011A3AYNARC0

The 5.5 kilowatts rated 20AD011A3AYNARC0 drive from the Allen-Bradley PowerFlex 70 AC drive series features a built-in HMI and remote I/O (DPI module). As part of the PowerFlex 70 series, it also features advanced motor control algorithms, including Vector control and Sensorless Vector control, and multiple stop modes including a fast brake, an S-curve, and a coast stop. The C frame 20AD011A3AYNARC0 comes in an IP20 rated enclosure which is designed for panel mounting. The drive should only be installed in a vertical orientation. The enclosure dimensions are 11.81 x 7.2 x 7.1 inches and the drive weighs 6.9 kilograms. Additional drive features include a brake IGBT and enhanced control (with no feedback and no safe torque-off feature).

The 20AD011A3AYNARC0 does not feature an integrated brake resistor. The full-featured LCD HMI supports multiple languages and it can be used for start-up, drive programming, and troubleshooting. The 20AD011A3AYNARC0 is designed to be operated at 480 Volts AC input. With 3-phase input, the drive output delivers the rated power at 5.5 kilowatts (7.5 Horsepower). The continuous current output with 3-phase input is 11 Amps. The drive output can sustain 16.5 Amps for 3 seconds and 12.1 Amps for 1 minute. The continuous current output with single-phase input is 5.5 Amps. The supported range of input voltage for the 20AD011A3AYNARC0 is from 342 to 528 Volts AC. The input frequency range is 47 to 63 Hertz. The output voltage range can vary between 0 and the rated motor voltage. The output frequency range is from 0 to 400 Hertz. The total output power dissipation is 167.8 Watts (27.8 Watts internal and 140 Watts external).