20AD011A3NYNANNN

The 20AD011A3NYNANNN is an adjustable frequency drive manufactured by Allen-Bradley. The drive has a current rating of 11 Amps and it operates on an input voltage of 480 Volts AC 3-phase. It is enclosed in an IP20 NEMA Type 1 enclosure. The 20AD011A3NYNANNN drive must be operated in an ambient temperature between 0 and 50 degrees Celsius. The drive should be stored at a temperature of -40 to 70 degrees Celsius. The humidity of the environment should be between 5 and 95%, non-condensing. The 20AD011A3NYNANNN is acceptable for use in Pollution Degree 1 and 2 environments. Pollution Degree 1 means either that there is no pollution or only dry and non-conductive pollution, and Pollution Degree 2 means that there is only non-conductive pollution or that occasionally there might be condensation when the drive is out of operation.

There are cooling fans inside the drive which help the drive to maintain the temperature, but care should be taken while installing the drive to maintain the minimum mounting clearances for the air to flow properly. The components inside the drive are sensitive to electrostatic discharge and might get damaged if the ESD protection guidelines are not followed. Also, the users must make sure there is no voltage present on the BUS capacitors. The users can verify the voltage with the help of a multimeter device on the DC+ and DC- terminals on the power terminal block. The 20AD011A3NYNANNN drive must be installed by a trained person and it should be inspected for visible damage before the installation begins. The users can contact the manufacturer support team for any information or assistance about the installation or the part number.