Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD014A0AYYANG0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD014A0AYYANG0

|
Need a Specific Revision?

The 20AD014A0AYYANG0 from Allen Bradley operates as an AC drive featuring different horsepower capacities based on operation type. It is capable of delivering 10 horsepower under normal-duty and 7.5 horsepower under heavy-duty tasks.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD014A0AYYANG0

ManufacturerAllen Bradley
Product TypeAC Drive
Product LinePowerFlex 70
Part Number20AD014A0AYYANG0
Weight12.00 lbs (5.44 kg)
Horsepower Capacity10 HP (normal duty); 7.5 HP (heavy duty)
Mounting & EnclosurePanel‑mount; IP20 / NEMA Type 1
Braking UnitIntegrated IGBT brake with 115 Ω dynamic resistor
Control SchemeEnhanced vector control with Safe Torque Off
Switching Frequency Range2–10 kHz in V/Hz; up to 12 kHz in vector mode
Output Frequency Span0–400 Hz (standard); up to 500 Hz (enhanced)
Input Supply480 VAC, three-phase
Continuous Current Output14 A at 480 VAC
EMC FilteringSecondary environment filter per CE EMC directive
Network Protocol SupportEtherNet/IP, DeviceNet, Profibus, Modbus, CAN, TCP/IP
Overvoltage Trip PointDC‑bus overvoltage trip at 810 V DC
Undervoltage Trip PointsAC input trip at 280 V AC; DC‑bus fault at 300 V DC
Overload ProtectionClass 10 motor overload per NEC 430 & UL 508C
Energy Efficiency97.5 % at rated current and nominal line voltage
Request a Repair

The Allen Bradley PowerFlex 70 series 20AD014A0AYYANG0 is designed for effective motor control in various operational scenarios. This AC drive operates at a three-phase input voltage of 480 VAC and provides a significant power output, achieving up to 10 horsepower under normal conditions and 7.5 horsepower for heavy-duty uses.

The unit can be easily mounted in a panel setup and is enclosed in an IP20/NEMA Type 1 housing, ensuring adequate protection. An integrated braking unit features an IGBT brake along with a dynamic resistor of 115 Ω, reinforcing the drive's capabilities during deceleration and stopping.

Operating within a frequency range of 0 to 400 Hz by default, the drive can also extend up to 500 Hz when enhanced functions are required. It supports a continuous output current of 14 A while maintaining an excellent energy efficiency rating of 97.5% at rated current and nominal voltage.

This drive is designed with advanced features such as enhanced vector control and a Safe Torque Off mechanism for added safety. In terms of connectivity, it supports several network protocols, including Ethernet/IP, DeviceNet, Profibus, Modbus, and CAN TCP/IP, providing extensive options for integration into automated systems.

The drive incorporates a secondary environment filter to comply with CE EMC directives, ensuring it minimizes electromagnetic interference. Overvoltage conditions trigger a DC-bus trip point at 810 V, while undervoltage trips occur at 280 V AC for the input and 300 V DC for the DC bus. Additionally, it includes Class 10 motor overload protection according to NEC 430 and UL 508C standards, providing reliable operational safeguards.