Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD014F0AYYANG0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD014F0AYYANG0

|
Need a Specific Revision?

The 20AD014F0AYYANG0 corresponds to an AC drive within Allen Bradley's PowerFlex 70 series. This unit operates with a voltage rating of 480V AC in a three-phase configuration and delivers up to 10 horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD014F0AYYANG0

ManufacturerAllen Bradley
Product TypeAC Drive
Product LinePowerFlex 70
Part Number20AD014F0AYYANG0
Weight12.00 lbs (5.44 kg)
Voltage Rating480V AC, 3-phase
Power Output7.5 kW / 10 HP
Current Rating14 Amps
Frame SizeC Frame
Enclosure TypeFlange Mount – Front Chassis = IP20, NEMA/UL Type 1; Rear Heatsink = IP66, NEMA/UL Type 4X/12
FilteringFiltered A & B Frames (Optional), C, D, & E Frames (Standard)
Brake SystemIncludes brake IGBT and internal brake resistor
Communication ModuleNo communication expansion
Control TypeEnhanced Control
Stop ModesMultiple programmable stop modes including Ramp, Coast, DC-brake, Fast brake, Ramp-to-hold, and S-curve
Acceleration/DecelerationTwo independently programmable accel and decel times (0–3600 seconds in 0.1-second increments)
Circuit Breaker Current Rating50 A @ 480V AC, 3-phase
Bus Voltage Nominal648V DC @ 480V
ApplicationIndustrial motor control and automation
Request a Repair

The 20AD014F0AYYANG0 AC drive is engineered by Allen Bradley as part of the PowerFlex 70 series. It is designed to handle an input of 480V AC in a three-phase setup, translating to a maximum power output of 7.5 kW or 10 horsepower. This drive accommodates a current rating of 14 Amps, offering a robust solution for various industrial applications.

This unit is categorized under frame size C and is designed for a flange-mounted installation. Its enclosure type is notable for having different ratings; the front chassis is IP20 (NEMA/UL Type 1), while the rear heatsink is rated IP66 (NEMA/UL Type 4X/12), providing significant protection against dust and moisture.

An optional filtering capability exists for A and B frame types, while standard filtering is provided for C, D, and E frame types. Featuring an enhanced control type, this model offers multiple programmable stop modes, including Ramp, Coast, DC-brake, Fast brake, Ramp-to-hold, and S-curve modes. For acceleration and deceleration control, it provides two independently programmable times, ranging from 0 to 3600 seconds, adjustable in 0.1-second increments.

The circuit breaker current rating is set at 50 Amps for this drive, accommodating an operational bus voltage of 648V DC when powered by 480V AC. Although this model does not include a communication expansion module, it remains a solid choice for industrial motor control and automation purposes.