20AD022A3AYNANG0

The 20AD022A3AYNANG0 is an adjustable frequency drive that belongs to the Powerflex 70 series of adjustable frequency AC drives. Even though the Allen-Bradley 20AD022A3AYNANG0 adjustable frequency drive with enhanced control is intended to operate in 3-phase applications, it can be adjusted to operate in single-phase applications. In this case, its voltage should be derated. The Allen-Bradley 20AD022A3AYNANG0 adjustable frequency drive has a full voltage rating of 480 Volts AC and an amperage rating of 22 Amps. It also has a frequency of 50 Hertz. The Allen-Bradley 20AD022A3AYNANG0 adjustable frequency drive has a panel-mounted enclosure which is intended for general purposes. This enclosure allows for an easy installation process without the need for disarming the whole drive. The drive should not be exposed to corrosive environments that contain chemicals and corrosive vapors or dust.

The maximum ambient air recommended for the Allen-Bradley 20AD022A3AYNANG0 adjustable frequency drive goes from 0 to 50 degrees Celsius. A relative humidity range of 5 to 95% without condensation is also recommended. When installing the drive, clearances of at least 7 millimeters should be left free in order to allow proper heat dissipation between the drives. If these clearances are not taken into account, the drive might overheat and this can result in damage or in product life reduction. These clearances must be left vertically between the drives. All the cables and terminals should be shielded and the drive with all its equipment should be included in a ground system. If the drive is located in a residential location, the users need to filter radio emissions.