20AD027A0AYNAECN

The Allen Bradley PowerFlex 70 series 20AD027A0AYNAECN is a D-frame AC drive. It can be panel mounted and comes in an NEMA type 1 enclosure. PowerFlex 70 drives can operate at 240, 480 or 600 Volts AC and can support applications requiring 0 to 50 Horsepower. The 20AD027A0AYNAECN puts out a 27 Amp current and 20 Horsepower at the rated input voltage, which is 480 Volts AC. This drive supports enhanced control (without safe torque off). An Ethernet interface is provided for efficient control and/or communication with host controllers. DeviceNet, serial, and ControlNet modules are also available as options. The drive does not feature an HMI or brake resistor. An optional HMI which features an LCD display and a keypad can be used with the drive. Some additional features available on the 20AD027A0AYNAECN include bus voltage regulation and current limit, flying start, PI control, users sets, slip compensation, droop control and sleep/wake control.

The 20AD027A0AYNAECN is available in a D-frame enclosure, which supports panel mounting. To minimize risk or injury and equipment damage, the drive installation should be carried out only by trained and experienced technicians. Prior to performing any maintenance, the voltage on the bus capacitors should be discharged completely. DPI or SCANport host devices should not be connected directly through the use of 1202 cables. ESD precautions are also advised to prevent damage to drive components. The weight of the 20AD027A0AYNAECN is approximately 9.2 kilograms and the measurements are 13.7 inches in height, 8.6 inches in width and 7.1 inches in depth.