20AD027A0NYNANN0

The 20AD027A0NYNANN0 is a PowerFlex 70 AC Drive manufactured by Allen Bradley. The Allen-Bradley 20AD027A0NYNANN0 AC Drive belongs to Series A PowerFlex 70 AC Drives Series. The Allen-Bradley 20AD027A0NYNANN0 AC Drive feature 27A current rating, 480V AC, 20 horsepower and three phases. The Allen-Bradley 20AD027A0NYNANN0 AC Drive is contained in IP20 Enclosure Type. The Allen-Bradley 20AD027A0NYNANN0 AC Drive settings can be viewed by utilizing a human interface module, a personal computer or the drive equipment. The condition of the Allen-Bradley 20AD027A0NYNANN0 AC Drive and the DriveLogix control is often monitored; hence any slight changes that will occur, it will be indicated through the human interface module or the front panel LEDs. The status indicators become visible when the Allen-Bradley 20AD027A0NYNANN0 AC Drive door is open.

The Allen-Bradley 20AD027A0NYNANN0 AC Drive can be integrated with Point to Point positioning mode to operate in an absolute mode. The Allen-Bradley 20AD027A0NYNANN0 AC Drive is able to capture feedback position upon an event occurrence by deploying registration. The Motion Arm Registration is used for control registration when the Allen-Bradley 20AD027A0NYNANN0 AC Drive is configured with DriveLogix™ Motion. The Allen-Bradley 20AD027A0NYNANN0 AC Drive is configured with a precharge function which provides a current limited charging of the circuit breaker drive’s bus capacitor. After the Allen-Bradley 20AD027A0NYNANN0 AC Drive’s power is restored and the precharge has been completed, the auto-restart enables the disconnect device to precede normal operations by supplying power to the module again. This operation is meant for protecting the Allen-Bradley 20AD027A0NYNANN0 AC Drive from excessive in-rush currents. However, the operator should know the safe techniques for the auto-restart functions because by default the Allen-Bradley 20AD027A0NYNANN0 AC Drive is set to a fault and not auto-restart when the power line dropout stays for more than 2 seconds.