20AD027A3AYNACC0

The 20AD027A3AYNACC0 is a PowerFlex 70 AC Drive manufactured by Allen-Bradley. The Allen-Bradley 20AD027A3AYNACC0 AC Drive is part of Series A of the PowerFlex 70 AC Drives. The Allen-Bradley 20AD027A3AYNACC0 AC Drive feature 27 Amps of current rating, 480 Volts AC, 3 operating phases, 20 Horsepower, and an enhanced control feature. The Allen-Bradley 20AD027A3AYNACC0 AC Drive is housed in a Frame D Enclosure Type. The Allen-Bradley 20AD027A3AYNACC0 AC Drive data can be recalled from or saved to the human-machine interface device. The Allen-Bradley 20AD027A3AYNACC0 AC Drive is set to the basic settings view initially. For the operator to view all the settings, the operator should configure Setting 196 to the Reset Setting so that it does not hinder 1 “Advanced” Setting 196. The Allen-Bradley 20AD027A3AYNACC0 AC Drive alarm indicates the status which is within the AC Drive that affects application operations and the Allen-Bradley 20AD027A3AYNACC0 AC Drive.

The settings 1093, 1094, and 1095 monitors whether signal loss indication is activated for each input and it indicates which procedure the Allen-Bradley 20AD027A3AYNACC0 AC Drive will follow when the loss of an analog input signal occurs. The speed reference ramp should be disabled when operating the Allen-Bradley 20AD027A3AYNACC0 AC Drive as a position follower. The operator can perform jog operations while the position loop is enabled and while the position loop output is switched on. The Allen-Bradley 20AD027A3AYNACC0 AC Drive is equipped with a point-to-point positioning feature that allows the operator to position the load without requiring an external position controller. The point-to-point mechanism is obtained by the position loop that moves from the initial position to the instructed position, after holding it at that location until a new reference or a stop command is executed. The Allen-Bradley 20AD027A3AYNACC0 AC Drive position loop can be scaled to different units. The operator should reset the speed reference to zero speed when utilizing the point-to-point positioning.