20AD034A0NYNACN0

The 20AD034A0NYNACN0 is a PowerFlex 70 AC Drive manufactured by Allen-Bradley. The Allen-Bradley 20AD034A0NYNACN0 AC Drive belongs to Series A of the Allen-Bradley PowerFlex 70 AC Drives. The Allen-Bradley 20AD034A0NYNACN0 AC Drive features 3 operating phases, 25 Horsepower of output, a blank cover interface module, 480 Volts AC voltage rating, a brake, 34 Amps of current rating, standard control, and a ControlNet (Coax) network type. The Allen-Bradley 20AD034A0NYNACN0 AC Drive is contained in a Frame D NEMA/UL Type 1 enclosure. The Allen-Bradley 20AD034A0NYNACN0 AC Drive settings can be viewed by utilizing a human-machine interface module, a personal computer, or the Allen-Bradley 20AD034A0NYNACN0 AC Drive equipment. The condition of the Allen-Bradley 20AD034A0NYNACN0 AC Drive and the DriveLogix control is often monitored so that any slight changes that occur will be indicated through the human-machine interface module or the front panel LEDs. The status indicators become visible when the Allen-Bradley 20AD034A0NYNACN0 AC Drive door is open.

The Allen-Bradley 20AD034A0NYNACN0 AC Drive provides suitable services and compatibility for IP-networks and DeviceNet and ControlNet networks, and the Allen-Bradley 20AD034A0NYNACN0 AC Drive is applicable for use with Internet-Bus, Profibus, Universal Remote I/O, and RS485 DFI devices. The Allen-Bradley 20AD034A0NYNACN0 AC Drive is normally programmed to reduce the voltage to attain the desired higher currents and it features a dual current rating, 1 current rating for normal operation and the another for heavy operation applications. Local control configuration helps in programming, starting, speed stopping, and emergency stopping. The Allen-Bradley 20AD034A0NYNACN0 AC Drive is equipped with an adhesive label located at the top of the Allen-Bradley 20AD034A0NYNACN0 AC Drive. If the operator removes the adhesive label, the Allen-Bradley 20AD034A0NYNACN0 AC Drive should be mounted in an enclosure that has 0.04-inch top openings and 0.5-inch side openings to operate within the LV directive compliance. The operators are recommended to utilize a motor cable which is relatively short to prevent capacitive currents and electromagnetic emission.