20AD034A3AYNACNN

The 20AD034A3AYNACNN is a PowerFlex 70 AC drive manufactured by Allen-Bradley. The Allen-Bradley 20AD034A3AYNACNN AC Drive belongs to Series A of the Allen-Bradley PowerFlex 70 AC Drives. The Allen-Bradley 20AD034A3AYNACNN AC Drive operates with 34 Amps of current rating, 480 Volts AC, 3 operating phases, a brake, standard control, a ControlNet network, and a full numeric LCD interface module. The Allen-Bradley 20AD034A3AYNACNN AC Drive is housed in a Frame D NEMA/UL Type 1 enclosure. The Allen-Bradley 20AD034A3AYNACNN AC Drive settings can be viewed by utilizing a human-machine interface module, a personal computer, or the drive equipment. The condition of the Allen-Bradley 20AD034A3AYNACNN AC Drive and the DriveLogix control is often monitored; hence any slight changes that occur will be indicated through the human-machine interface module or the front panel LEDs. The status indicators become visible when the Allen-Bradley 20AD034A3AYNACNN AC Drive door is open.

The Allen-Bradley 20AD034A3AYNACNN AC Drive can be integrated with the point to point positioning mode to operate in an absolute mode. The Allen-Bradley 20AD034A3AYNACNN AC Drive is able to capture the feedback position upon an event occurrence by deploying the registration. The Allen-Bradley 20AD034A3AYNACNN AC Drive is configured with a Precharge Function which provides a current limited charging for the circuit breaker drive’s bus capacitor. After the Allen-Bradley 20AD034A3AYNACNN AC Drive’s power is restored and the precharge has been completed, the auto-restart enables the disconnect device to precede normal operations by supplying power to the module again. This operation is meant for protecting the Allen-Bradley 20AD034A3AYNACNN AC Drive from excessive in-rush currents. However, the operator should know the safe techniques for the auto-restart functions because by default the Allen-Bradley 20AD034A3AYNACNN AC Drive is set to a fault and not auto-restart when the power line dropout stays for more than 2 seconds.