20AD040A3NYNADCN

The 20AD040A3NYNADCN is an Allen Bradley drive that is classified under the PowerFlex 70 drive series and features an input voltage of 480 Volts AC. The 20AD040A3NYNADCN is a three-phase drive that comes with an amperage rating of 40 Amps with an output voltage of 30 HP. The module features a D-type frame and comes with the panel mount IP20 NEMA/UL Type 1 enclosure. The module features a full numeric LCD display for configuration of the drive. The LCD display on the 20AD040A3NYNADCN acts as the drives HMI and features various connection points including DPI Port 1 for an HMI connection when installing in cover. The DPI port 2 functions as a cable connection for the handheld or the remote display, while the DPI port 3 is the splitter cable that is usually connected to the DPI port 2 providing an additional port.

The 20AD040A3NYNADCN comes with an IGBT brake type and features filtered A and B frames with optional C and D standards. It comes with a DeviceNet network type and features enhanced control. The module features an operating temperature of 0 to 50 degrees Celsius with a storage temperature of -40 to 70 degrees Celsius. The 20AD040A3NYNADCN comes with a frequency tolerance of 47 to 63 Hertz and features voltage tolerance of -10 of the minimum voltage and +10% of the maximum voltage. The 20AD040A3NYNADCN features a Power-Ride-thru and Logic-Control-Ride-Thru. It also comes with a ground fault trip for phase to ground on the drive output. The 20AD040A3NYNADCN features a heat sink thermistor that is monitored by a microprocessor overtemp trip.