Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD040A4AYNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD040A4AYNNN

|
Need a Specific Revision?

This drive built by AB is a 22 kW drive. Additionally, it is a 40 A rated unit. It has a horsepower rating of 30 HP. This PowerFlex 70 comes with a panel mount (IP20).

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD040A4AYNNN

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD040A4AYNNN
Weight10.00 lbs (4.54 kg)
Voltage480V AC
Ph3
Amps40
kW(Hp)22 (30)
FrameD
EnclosurePanel Mount - IP 20, NEMA/UL Type 1
Interface ModuleBlank Cover
TypeManual
w/BrakeYes
w/ResistorNo
RatingNot Filtered A & B Frames (Optional) C, D & E Frames
Network TypeNone
FeedbackNo Feedback - Enhanced Control
View as PDF
Request a Repair

The 20AD040A4AYNNN is an adjustable frequency AC drive. It is manufactured by Allen-Bradley and it is used in industrial applications. The users must be familiar with and trained with installing AC drives before they begin the installation of the drive. The 20AD040A4AYNNN drive is made to be used in a non-corrosive environment. The ambient temperature in which the drive must be operated should be according to the specifications mentioned in the installation manual. The users must make sure the input operating voltage of the power line is not more than the rated voltage, which is 480 Volts AC, 3-phase. The users can install one or more output contactors between the drive and the load for the isolation of certain loads.

When the contact is open, the motor will be disconnected, but the 20AD040A4AYNNN drive will be operational and this can cause the drive to be damaged because excessive current will flow when the motor is reconnected. The drive has a maximum current rating of 40 Amps and the maximum power output of the drive is 22 kW and 30 Horsepower. The enclosure of the drive is a panel mounted enclosure which has an IP rating of IP20. The 20AD040A4AYNNN drive has a full LCD HMI interface which lets the users program the drive and also set up various parameters to control the drive. While performing the installation, they should follow the steps mentioned in the installation manual and make sure the safety guidelines are followed according to the local regulations. If the users need any further assistance,

Revision Part #Also known as
20AD040A4AYNNN Ser A20AD040A4AYNNN/A, Series A, Rev A
Don't see your particular revision? Contact us now.