20AD052A0AYNAND0

The 20AD052A0AYNAND0 is a drive from the Powerflex 70 series manufactured by Allen-Bradley. The drive has been designed to meet the relevant industry standards and ratings and it delivers out-of-the-box performance. The drive has an IGBT braking system which offers high braking torques in a short time period. Braking resistors are missing in this drive. The drive is operated using a 480 Volts AC supply. The current rating for this AC drive is 52 Amps. The factory rated power rating for this drive is 40 Horsepower. The body has an E Frame and a NEMA/UL Type 1 enclosure and it can be panel-mounted. The enclosure of the drive has an IP20 rating. The drive is not waterproof. No communication adapter is present in this drive. The front face of the drive has a blank cover and the human-machine interface module is missing in this drive. The 20AD052A0AYNAND0 drive has a standard control and the safe torque-off feature is missing. No feedback mechanism is present in this drive.

The 20AD052A0AYNAND0 can only be operated with a room temperature of between 0 and 50 degrees Celsius. The storage temperature should be maintained between -40 and 70 degrees Celsius. The relative humidity should be 95%, non-condensing. The drive supports line transients of up to 6000 volts per peak according to the IEEE standard. The control logic noise immunity can support arc transients of up to 1500 Volts. The drive has a power ride thru of 15 milliseconds at a full load and a logic control ride-thru of minimum 0.5 seconds. The drive also features a ground fault trip and a short circuit trip. The 20AD052A0AYNAND0 has fast-acting current limit and bus voltage regulation which results in maximum acceleration and deceleration without any tripping. The drive can be started in an analog way by using the sleep/wake control. The drive also features PI control which can eliminate the need for a separate process loop controller.