20AD052A3AYNAECN

The 20AD052A3AYNAECN is a Powerflex AC drive and has been designed and manufactured by Allen-Bradley. The drive has a 3-phase operating voltage of 480 Volts AC and it has an amperage rating of 52 Amps. This drive is widely used in industrial areas for controlling motors with precise torque regulation and speed control. The device has an E Frame. The power rating of this drive is 40 Horsepower. The drive uses a panel mounting base for mounting purpose. The drive is enclosed inside a NEMA/UL Type 1 enclosure and it can be used only in an indoor environment. It is not water-resistant. It follows the EMC directives and comes with an IGBT braking system installed in it. The 20AD052A3AYNAECN lacks a braking resistor. The drive uses the Ethernet/IP adapter to communicate with other add-ons and Allen-Bradley compatible devices. All of the communication-related activities can be known through the status indicator located in the front panel of the drive.

The 20AD052A3AYNAECN uses a microprocessor-controlled thermistor and trips for over temperature. It does not have the safe torque-off feature. The voltage tolerance is -10% minimum and +10 % maximum and the input frequency tolerance is in the range of 47 to 63 Hertz. The drive is 97.5 % efficient. It has a displacement power factor of 0.98 across all speed ranges. The drive supports transients of up to 6000 volts peaks according to the IEEE standards. During the installation of the device, enough vertical clearance should be available for better airflow across the heatsink and chassis. The air temperature at the inlet point should also not exceed the product specification. The 20AD052A3AYNAECN drive uses a cooling fan to reduce the heat inside the drive. The storage temperature of the drive falls in between -40 and 70 degrees Celsius. It requires a non-condensing 5 to 95% humidity range and the drive can be used at a height of 1000 meters above sea level.