Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD052A3NYNACC0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD052A3NYNACC0

|
Need a Specific Revision?

The 20AD052A3NYNACC0 drive is an AC drive with a Frame E body. It can run with a 110% overload for 1 minute and for 3 seconds with a 150% overload.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD052A3NYNACC0

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD052A3NYNACC0
Weight32.00 lbs (14.51 kg)
DescriptionVariable Frequency drive
Voltage480 Volts AC
FrameE
Power40 HP
Current52 Amperes
Stop modesRamp, Coast, DC-brake, S-curve
Temperature0 to 50 degrees Celsius
MountingPanel mount
BrakingIGBT
Request a Repair

The Allen-Bradley 20AD052A3NYNACC0 drive is a PowerFlex 70 AC drive with a voltage rating of 480 Volts AC. It uses 52 Amps of current and it generates 40 Horsepower of output power. The drive is housed inside a Frame E body with an IP 20 rated enclosure. It can be mounted easily with a panel mounting base. It uses the ControlNet protocol for communication. A fully numeric keypad is present in the variable frequency drive. It has numerical keys, navigational keys, control keys, and function keys to feed input to the drive. An LCD screen is present along with the keypad for the easy setup of the drive. The 20AD052A3NYNACC0 drive has an IGBT braking system but no braking resistor. No feedback option is available with this drive variant. The flying start feature in the drive helps to deliver smooth connections into rotating loads without using feedback devices.

The 20AD052A3NYNACC0 drive features ground fault protection which runs during the drive startup to ensure the reliability of the drive. It uses motor overload protection to prolong the life of the motor. The drive can operate with an intermittent overload. It can run with a 110% overload for 1 minute, and it can run for up to 3 seconds with 150% overload. The 20AD052A3NYNACC0 drive features different stop modes including the Ramp, Coast, DC-brake, Ramp to hold, and S-curve stop modes. The VFD runs by using a sine-coded PWM with a programmable carrier frequency. The drive is able to control frequency and speed by using the slip compensation method in the Volts per Hertz control mode. The maximum temperature should not exceed 50 degrees Celsius for proper operation.