20AD065A0NYNACC0

The Allen-Bradley/Rockwell Automation 20AD065A0NYNACC0 is a 50 Horsepower variable frequency drive. The drive belongs to the unfiltered emissions class and it uses an enhanced control for its I/O. The 20AD065A0NYNACC0 accepts a ControlNet network type. The drive is shipped without an interface module. The drive is enclosed in a NEMA Type 1 enclosure. The 20AD065A0NYNACC0 is designed to be mounted on a panel and it supports medium and heavy-duty motors, provided the motor Horsepower rating does not exceed that of the drive. The Rockwell Automation 20AD065A0NYNACC0 is connected to external devices by using terminal blocks which are located on the lower side of the drive. The drive has separate terminal blocks for signal and power connections.

The power terminal block, which also houses control terminals, accommodates both digital and analog terminals. This terminal block is used for things like faults, output frequency, and speed, run, start, and stop configurations. Due to its enhanced control feature, the 20AD065A0NYNACC0 allows a digital input to be programmed as an enable input. It also accommodates a safe-off board terminal block which can be used to define the maximum resistive load and the maximum inductive load. It also allows for the monitoring of a relay status. The Allen-Bradley 20AD065A0NYNACC0 has its operating frequency capped at 60 Hertz and its current is 65 Amps. The drive is powered from a 3-phase AC power source with a voltage rating of between 400 and 480 Volts AC. The 20AD065A0NYNACC0, as with other PowerFlex 70 AC drives, is suitable for open-loop speed regulation, closed-loop speed regulation, and for exact torque and speed regulation.