20AD065A0NYNANC0

The Allen-Bradley/Rockwell-Automation 20AD065A0NYNANC0 is a 65 Amps adjustable frequency drive with an input voltage rating of 480 Volts AC. The drive has no communication module but it has a pre-installed IGBT brake. The 20AD065A0NYNANC0, as with other PowerFlex 70 drives, can be programmed for either Volts per Hertz control, Sensorless Vector Control, or Vector Control with FORCE technology. Using this technology prepares the 20AD065A0NYNANC0 for a diverse section of the applications used on the industrial floor. This covers anything from extruders to fans. Although the 20AD065A0NYNANC0 has no communication module, interfacing the drive with such devices will increase the communication rates with other controllers. These tools also assist in troubleshooting and monitoring the drive.

The 20AD065A0NYNANC0 easily interfaces with rotating loads without using a speed feedback device. By eliminating the need for a speed feedback device, the 20AD065A0NYNANC0 is capable of providing 0.5% (minimum) of open-loop speed regulation, but not in all applications. The Allen-Bradley adjustable frequency drive has a start-up ground fault protection which also increases its reliability. Additionally, the 20AD065A0NYNANC0 has 6 kilovolts of transient protection and increased robustness. The drive also features common mode capacitors to the ground, making the drive suitable for use in ungrounded systems. With the drive having a motor load protection (electronic) the controlled motor has an extended operating life. The 20AD065A0NYNANC0 has an E Frame size and it is powered from a 3-phase power supply. The drive is supplied with no documentation.