Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD1P1C3AYYNNG0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD1P1C3AYYNNG0

|
Need a Specific Revision?

The 20AD1P1C3AYYNNG0 AC variable frequency drive belongs to the Allen Bradley PowerFlex 70 series. It operates on a 480 V AC three-phase input and has a voltage fluctuation tolerance of -10% to +10%. This drive can output to a 3-phase motor and tolerates voltage imbalances of ±10%.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD1P1C3AYYNNG0

ManufacturerAllen Bradley
Product TypeAC Variable Frequency Drive
Product LinePowerFlex 70
Part Number20AD1P1C3AYYNNG0
Weight10.00 lbs (4.54 kg)
Input Voltage480 V AC, 3-Phase
Voltage Tolerance Range-10% to +10% Input Voltage Fluctuation
Output Phase Configuration3-Phase Motor Output
Phase Symmetry Tolerance±10% Voltage Imbalance Tolerance
Dynamic BrakingIntegrated Braking Resistor and IGBT Module
Control SystemEnhanced Logic with Safe Torque Off (STO) Safety
Digital I/O Capacity6 Digital Inputs, 2 Digital Outputs
Analog Signal Ports2 Analog Inputs, 1 Analog Output
Communication ProtocolsEtherNet/IP, DeviceNet, Modbus, PROFIBUS, CAN, TCP/IP
Efficiency Rating97.5% Efficiency at Full Load and Nominal Voltage
Mains Frequency50 Hz (±3 Hz Tolerance)
Filter ConfigurationExcludes Built-in EMC Filters or Line Reactors
Feedback SupportNo Encoder/Feedback Interface Pre-configured
Internal Communication SlotsNo Pre-installed Communication Modules
Request a Repair

The PowerFlex 70 series 20AD1P1C3AYYNNG0 is an AC variable frequency drive developed by Allen Bradley. This unit operates with an input voltage of 480 V AC in a three-phase setup and allows for voltage fluctuations to range between -10% and +10%. Supporting three-phase output, it manages a phase symmetry tolerance with an imbalance tolerance of ±10%.

In terms of braking capability, this drive includes a built-in braking resistor paired with an IGBT module to enable effective dynamic braking, enhancing control during deceleration. The control system's safety is reinforced by an integrated Safe Torque Off (STO) feature, which minimizes hazards in operational settings. The device offers flexibility with its digital I/O: it includes six digital inputs and two digital outputs, along with two analog input ports and one analog output port, making it suitable for various applications.

Communication options for this drive are extensive, supporting protocols like EtherNet/IP, DeviceNet, Modbus, PROFIBUS, CAN, and TCP/IP. This ensures seamless integration with existing networks and controls. The drive is efficient, boasting an efficiency rating of 97.5% under full load and nominal voltage.

The mains frequency is stable at 50 Hz, with a tolerance of ±3 Hz. Notably, the design does not incorporate built-in EMC filters or line reactors, which may be a consideration based on application requirements. Additionally, this drive does not come pre-configured with encoder or feedback interfaces, and there are no internal communication slots with pre-installed modules.