20AD1P1F0AYNANC0

The Allen-Bradley 20AD1P1F0AYNANC0 PowerFlex 70 Adjustable Frequency Drive is a modularly designed drive in the PowerFlex 70 series, with both normal and heavy-duty ratings and enhanced motor control for the speed and the direction of the drive control of industrial motors. The 20AD1P1F0AYNANC0 drive, unlike some drives in the series, has no HIM module, a communication module, mounted brake resistor, or feedback device, but it has an IGBT brake. The drive has an operating voltage of 480V AC (3-phase input) at 4 to 63Hz, with an input tolerance of -+10%, and with an operating current of 1.1A. It has a normal-duty power rating of 0.5HP, with a heavy-duty rating of 0.33HP, and it has a 0.64 displacement power factor and an efficiency of 97.5%. The 20AD1P1F0AYNANC0 offers an AC over/under voltage trip of 570V AC and 280V AC, respectively, and the drive has high-temperature detection and control, monitored by a heat sink thermistor. It has a MOV installed which prevents surges, and it has phase-to-phase and phase-to-ground fault trip, and the drive has a power and logic ride thru time of 15ms and 2s respectively. The 20AD1P1F0AYNANC0 provides selectable motor control through its Sensorless Vector Control feature and Volts per Hertz feature, using a Sine-coded PWM signal with a programmable carrier frequency range of 2 to 10 kHz, and it is suitable for applications with open-loop speed regulation, closed-looped speed regulation, and precise torque and speed regulation.

The 20AD1P1F0AYNANC0 has a programmable output frequency range between 0 and 400Hz, proportional to its output voltage range between 0 and the rated motor voltage, and it offers two programmable and independent Accel/Dec times. The drive has 2 Analog inputs (1 bipolar voltage or current and 1 unipolar voltage or current), 1 unipolar voltage/ current Analog outputs, 2 Form C relay outputs, and 6 Digital inputs that have 24V DC control, and a control accuracy within -+0.4%. The 20AD1P1F0AYNANC0’s operating temperature range is 32-122 °F at 5-95% non-condensing relative humidity, and it is stored at a temperature range of -40-158 °F. The drive’s maximum installation altitude is 1000m without de-rating, and it is built to withstand a 15G operational shock and a 1G peak vibration. The drive weighs approximately 4.496Kg (9.9lb), and with total dimensions of 171.2mm x 122.7mm x 220.2mm (6.74in x 4.83in x 8.67in), and it is cUL-us, and CE certified. The 20AD1P1F0AYNANC0 has a NEMA Type 1 general purpose enclosure, and it is UL, CE, c-UL, and C-Tick certified.