20AD2P1A3AYNNNC0

The Rockwell Automation 20AD2P1A3AYNNNC0 is a PowerFlex 70 adjustable frequency drive with an input voltage of 480 Volts AC. The drive is powered from a 3-phase power source. The 20AD2P1A3AYNNNC0 has an amperage rating of 2.1 Amps a Horsepower output of 1.0 Horsepower, and an apparent power of 0.75 Kilowatts. The drive has a Type A frame. The drive is supplied with an English instruction manual that dictates, among other things, how to handle operating faults. The manual also gives directions on the best practices during installation. This helps to reduce the drive’s downtimes and increase safety when using the drive. The Allen-Bradley 20AD2P1A3AYNNNC0 does not have an internal brake resistor or a built-in communication slot. Additionally, the drive does not need feedback encoder. The drive allows for standard control which does not have a safe-off option.

The drive is panel-mountable in environments with an International Protection rating of 20 (IP20). Drives with this protection rating are guarded against lightweight solid objects but not liquids. Note that the 20AD2P1A3AYNNNC0 is prone to static charges and internal components may be damaged if static control procedures are not followed during installation, servicing, or when repairing the drive. When wiring the 20AD2P1A3AYNNNC0, the maximum surrounding air temperature must be considered. This is because the electrical components of the drive produce heat. The accumulation of this heat inside the drive or its surroundings can alter the optimal operation of the drive. The 20AD2P1A3AYNNNC0, as with other PowerFlex 70 AC drives with an IP20 enclosure rating, should be mounted in environments with an ambient temperature range between 0 and 50 degrees Celsius.