Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD3P4A0AYNADNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD3P4A0AYNADNN

|

The AB 20AD3P4A0AYNADNN PowerFlex 70 AC drive has an amperage rating of 3.4 Amp. Additionally, this Allen-Bradley/Rockwell Automation PF70 is a 2 horsepower rated unit. This AC drive is a 1.5 kilowatt drive. This adjustable frequency drive allows for communication with a DeviceNet module included and comes with an A frame size. It has no HIM, instead it has a blank cover.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD3P4A0AYNADNN

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD3P4A0AYNADNN
Weight12.00 lbs (5.44 kg)
Voltage480V AC
Ph3
Amps3.4
kW(Hp)1.5 (2.0)
FrameA
EnclosurePanel Mount - IP 20, NEMA/UL Type 1
Interface ModuleBlank Cover
TypeManual
w/BrakeYes
w/ResistorNo
RatingFiltered A & B Frames (Optional) C, D, & D Frames (Standard)
Network TypeDeviceNet
ControlStandard
Safe OffN/A
FeedbackNo Feedback - Enhanced Control

The 20AD3P4A0AYNADNN PowerFlex 70 Adjustable Frequency AC Drive is a variable frequency AC drive by Allen-Bradley that is designed to provide out-of-the-box motor control solutions to a wide range of applications. This features standard motor control with slip compensation which delivers 0.5% open speed regulation for accurate speed control, and it also offers inertia ride through, which offers trip-less ride through in a prolonged power outage by using the energy stored within high loads. The 20AD3P4A0AYNADNN has a carrying current rating of 3.4 Amps, with a nominal voltage rating of 480 Volts AC, and it has a total power output rating of 2.0 Horsepower. It has a 0.98 displacement power factor with 97.5% efficiency and it offers up to 200,000 Amps of maximum fault limit with the use of standard fuses and circuit breakers. It has a built-in temperature control feature with BUS voltage regulation for enhanced performance, and it also has a current limit capacity with programmable limits of 20 to 160% of the nominal load.

The 20AD3P4A0AYNADNN provides protection against phase-to-phase, phase-to-ground, and occasional line spikes in excess of 6000 Volts by using removable metal oxide varistors across its circuitry. It is programmed for Volt per Hertz control and suitable for simple applications like fans and pumps, and it uses a sine-coded pulse width modulated output signal for control. It offers 0.5% speed regulation over a 40:1 speed range using slip compensation, and it allows adjustable acceleration and deceleration times, each programmed individually from 0 to 3600 seconds. The 20AD3P4A0AYNADNN has CE certified EMC line filtering which helps reduce interference from EM noise, and it also features dynamic transistor braking which provides a low-cost/effective means of switching the regenerative energy. It has a DeviceNet communication adapter interface which allows for simple remote programming, control, monitoring, and transfer of data over the DeviceNet network. The 20AD3P4A0AYNADNN has an IP20 airtight enclosure, designed for simple panel mounting, and it has an operating temperature range of 0 to 50 degrees Celsius. It has a net shipping weight of 2.71 kilograms (enclosure inclusive) and with dimensions of 122.4 x 225.7 x 179.8 millimeters.

Revision Part #Also known as
20AD3P4A0AYNADNN Ser A20AD3P4A0AYNADNN/A, Series A, Rev A
Don't see your particular revision? Contact us now.