20AD3P4A3AYNNENN

The 20AD3P4A3AYNNENN PowerFlex 70 Adjustable Frequency AC Drive is a high-performance Digital AC drive by Allen-Bradley that is designed to offer exceptionally high speed and torque control in a wide range of applications. It features an internal Ethernet/IP communication interface module which provides fast and efficient means of control and data exchange with host controllers over the Ethernet network, and this interface allows for easy integration of the drive into other factory processes. The 20AD3P4A3AYNNENN has 3-phase 480 Volts AC input voltage, with a 3-phase output voltage range of 0 to the rated motor voltage, and it has a total power output of 2.0 Horsepower and a nominal current of 3.4 Amps. It has a drive to motor ratio of 2:1, with a 0.98 displacement power factor, and with an operational efficiency of 97.5%. The 20AD3P4A3AYNNENN is built to provide protection against ground line faults, transient voltage spikes, and excessive temperatures, and it also provides BUS voltage regulation and fast-acting current limiting for maximum deceleration and acceleration without tripping. It provides a high degree of control by using a sine-coded pulse-width modulated signal and provides an adjustable output voltage selectable from 0 to the rated motor voltage.

The 20AD3P4A3AYNNENN offers 0.5% speed control without a feedback device, and it also provides speed and torque control accuracy by using “Slip Compensation.” It has an overload capability of 115% for 1 minute, and it offers users 2 programmable acceleration and deceleration times, each programmed from 0 seconds to 3600 seconds. It is not fitted with an internal brake resistor, but it comes standard with an integral brake transistor for cheap but effective braking solutions. The 20AD3P4A3AYNNENN has an internal Ethernet/IP communication adapter, which provides communication capability, thus providing easy means for control, programming, exchange of data with host controllers, and for seamless integration of the drive with other machines.  It has a cost-effective full numeric interface module with multilingual descriptive text, and a programming keypad for data/parameter entering, start-up, metering, troubleshooting, and configuration.  The 20AD3P4A3AYNNENN has a NEMA Type 1 enclosure designed for simple indoor/outdoor mounting, and it has a 0 to 50 degrees Celsius operating temperature range. The 20AD3P4A3AYNNENN has total mounting dimensions of 122 x 226 x 180 millimeters, and a net weight of 2.7 kilograms.