Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD3P4A3AYNNNG0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD3P4A3AYNNNG0

|

This AB 1.5 kW drive has an amperage rating of 3.4 A. Additionally, it is a 2 HP rated unit, has a panel mount (IP20), and has a safe off option installed. This PowerFlex 70 utilizes 480V AC power to operate. It is a size A frame unit. It comes with an enhanced control unit included.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD3P4A3AYNNNG0

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD3P4A3AYNNNG0
Weight6.25 lbs (2.83 kg)
Voltage480V AC
Ph3
Amps3.4
kW(Hp)1.5 (2.0)
FrameA
EnclosurePanel Mount - IP 20, NEMA/UL Type 1
Interface ModuleFull Numeric LCD
TypeManual
w/BrakeYes
w/ResistorNo
RatingNot Filtered A & B Frames (Optional) C, D & E Frames
Network TypeNone
ControlEnhanced
Safe OffYes
FeedbackNo Feedback - Enhanced Control

The Allen-Bradley 20AD3P4A3AYNNNG0 PowerFlex 70 Adjustable Frequency AC Drive is a digital AC drive in the high-performance PowerFlex 70 series of drives with digital control that are designed to provide a high degree of motor control in a variety of industrial and non-industrial applications. This drive is fitted with a cost-effective LCD interface module with a multilingual text description for start-up, programming, metering, and troubleshooting, and it features enhanced motor control options (Sensorless Vector Control or Vector Control) with the safe torque-off option for safety on the factory floor. The 20AD3P4A3AYNNNG0 has a 3-phase voltage rating of 480 Volts AC, with a 3.4 Amps nominal current rating and with 1.5 Kilowatts of power output. It has a 0.98 power factor across all possible speed ranges, and it offers 97.5% operational accuracy at a nominal voltage rating. The 20AD3P4A3AYNNNG0 has built-in protection against ground faults and intermittent line spikes, and it has a digital current limiting capability with a BUS voltage regulation for optimized use. It also has excessive temperature monitoring at the heatsink, and it can ride faultlessly through 15 milliseconds (maximum) power loss by using the rotational energy stored in high-inertia loads.

The 20AD3P4A3AYNNNG0 can be programmed for either Volt per Hertz control that is suitable for simple fan and pumps applications, or the Sensorless Vector control for high torque control over a wide speed range, and the Vector control with the patented FORCE Technology for outstanding speed and torque control without a feedback device. It features a safe torque-off integrated circuit, which prevents any torque generating energy from acting on the connected motor, thus avoiding unintentional motor starting and at the same time retaining motor data. The 20AD3P4A3AYNNNG0 features an IGBT brake transistor, which provides an effective means of switching regenerative energy, and it has a full numeric LCD HMI, which provides an easy means for start-up, control, configuration, metering, and troubleshooting. It has an operating temperature range of 0 to 50 degrees Celsius, and it is enclosed within a NEMA/UL Type 1 enclosure. The 20AD3P4A3AYNNNG0 is CE, c-UL-us, ABS, and RCM certified, and it has approximate shipping dimensions of 4.82 x 8.89 x 7.08 inches.

Revision Part #Also known as
20AD3P4A3AYNNNG0 Ser A20AD3P4A3AYNNNG0/A, Series A, Rev A
Don't see your particular revision? Contact us now.