Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD3P4F0AYNNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD3P4F0AYNNNNN

|

The 20AD3P4F0AYNNNNN built by Allen Bradley comes with a rating of 3.4 Amp. This PowerFlex 70 AC drive comes with a rating of 1.5 kW. Also, this PowerFlex 70 is a 2 HP rated drive. This drive is powered by 480 VAC (50 Hz) and comes with a blank cover instead of the keypad/LCD module. This PowerFlex 70 AC drive has an A frame size.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD3P4F0AYNNNNN

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD3P4F0AYNNNNN
Weight6.38 lbs (2.89 kg)
Voltage480V AC
Ph3
Amps3.4
kW(Hp)1.5 (2.0)
FrameA
EnclosureFlange Mount - Front Chassis = IP 20, NEMA/UL Type 1; Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use
Interface ModuleBlank Cover
TypeManual
w/BrakeYes
w/ResistorNo
RatingNot Filtered A & B Frames (Optional) C, D & E Frames
Network TypeNone
ControlStandard
Safe OffN/A
FeedbackNo Feedback - Enhanced Control

The Allen-Bradley/Rockwell Automation 20AD3P4F0AYNNNNN AC drive with adjustable frequency is part of the PowerFlex 70 series that offers various drives intended for specific applications where drives need to be configured in a certain way. The drives from this series provide a broad spectrum of features and are easily integrated into the system’s architecture. The PowerFlex 70 drives are available in the following power ratings: 200 to 240 Volts AC with 0.37 to 18.5 kilowatts. 0.5 to 25 Horsepower, and 2.2 to 70 Amps, 380 to 480 Volts AC with 0.37 to 37 kilowatts, 0.5 to 50 Horsepower, and 1.1 to 72 Amps, and 500 to 600 Volts AC with 0.5 to 50 Horsepower, and 0.9 to 52 Amps. These drives are also available with different enclosure protection levels, including the IP20 NEMA/UL Type 1, the IP54 NEMA/UL Type 12, and the IP66 NEMA/UL Type 4X/12 that is mostly intended for indoor use.

The PowerFlex 70 20AD3P4F0AYNNNNN drive has an operating voltage of 480 Volts AC and it requires a power source with 3 phases. The amperage rating of the drive is 3.4 Amps while its power output is 2 Horsepower or 1.5 kilowatts. The drive comes with an A frame type and an enclosure that is labeled as an IP20 NEMA/UL Type 1 enclosure for its front chassis and an IP66 NEMA/UL Type 4X/12 enclosure for its rear heatsink. Because of the IP66 marking, this model is fitted for either indoor or outdoor use. It should be also mentioned that the 20AD3P4F0AYNNNNN comes with a flange mount for its front chassis. The drive is delivered with a manual and it includes the brake function and standard control. However, the drive does not include a network communication module, resistor, safe off, or feedback (enhanced control). Also, it should be noted that the interface module of the enclosure drive comes with a blank cover. In addition to that, this drive can be equipped with an emission filter but it does not come as standard with this kind of frame. This compact unit features dimensions of 122.4 millimeters (4.82 inches) in width, 225.7 millimeters (8.89 inches) in height, and 179.8 millimeters (7.08 inches) in depth while its weight is 2.71 kilograms or 6 pounds.

Revision Part #Also known as
20AD3P4F0AYNNNNN Ser A20AD3P4F0AYNNNNN/A, Series A, Rev A
Don't see your particular revision? Contact us now.