20AD5P0A0AYNADG0

The 20AD5P0A0AYNADG0 is a variable frequency controller from Rockwell Automation/Allen-Bradley. This controller eliminates the need for a motor starter. The 20AD5P0A0AYNADG0 operates within the 400 Volts AC voltage class at a frequency of 50 Hertz. The drive accommodates external devices such as terminators and reflected wave reduction modules. The 20AD5P0A0AYNADG0 is a part of the PowerFlex 70 series of Allen-Bradley drives. Drives in this series have status indicators to help monitor and troubleshoot the drive or the devices connected to it. For example, a flashing red status light indicates that the drive has experienced a fault. The fault can be cleared by either pressing the stop button, cycling the drive’s input power, or by pressing the ‘clear faults’ button on the 20AD5P0A0AYNADG0. Other status LEDs indicate conditions like incorrect digital input programming (a flashing yellow status light) or incorrect input wiring (a flashing green status light).

The 20AD5P0A0AYNADG0 does not have status LED indicators when an incorrect reference source has been programmed and when the motor Autotune procedure was not performed. Note that these faults prevent the drive from operating as required but also that the faults are not reported by the LEDs on the drive. The Allen Bradley 20AD5P0A0AYNADG0 has a current rating of 5.0 Amps and a horsepower rating of 3.0 Horsepower. The drive has an internal brake IGBT but it has no internal brake resistor and no feedback encoder. The 20AD5P0A0AYNADG0 supports enhanced control with a Safe-Off option. To drive contains an onboard DeviceNet communication port and it belongs to the filtered emission class of drives. When in operation, the 20AD5P0A0AYNADG0 can accommodate a shock of 15 G.