20AD5P0A0AYNANC0

The Allen-Bradley 20AD5P0A0AYNANC0 is a frequency adjustable AC drive from the PowerFlex 70 series. Its input voltage is a 3-phase 480 Volts of AC, and this AC drive produces 2.2KW (3.0 HP, 2.0 HP heavy duty) and 5.0A for its output. The drive has a 0 to 400 Hertz output frequency range. The product with this code is panel mounted, IP20 protected (NEMA/UL Type 1), and has a blank cover with no communication, although its hardware supports IGBT break and filtration. There is no internal brake resistor and no encoder feedback option except with an enhanced open-loop control. The 20AD5P0A0AYNANC0 can apply Volts/Hertz, sensorless vector control, and vector control, using FORCE technology. It features fast acting current limit and bus voltage regulations, PI control, flying start, inertia ride-through, and slip compensation. Signal lamps that serve as an interface are PORT, MOD, NET A, and NET B.

Protection of the device and the motor connected to it is secured via a heat sink thermistor, drive overcurrent trip (20 to 160% of rated current), ground fault trip, and short circuit trip. The 20AD5P0A0AYNANC0 AC drive has outer dimensions of 171.7 x 234.6 x 179.8 millimeters (6.76 x 9.24 x 7.08 inches). The shipping weight is approximately 3.60 kilograms (7.9 pounds). This is a fan-cooled device (fan air inlet on the bottom side). This module’s installation operating temperature range is 0 to 50 degrees Celsius, and a zero-stacking option is allowed without reduction of ambient temperature rating.