Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD5P0A1AYNNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD5P0A1AYNNNNN

|

The 20AD5P0A1AYNNNNN made by AB has a rating of 2.2 kilowatt. In addition, it is a 3 HP drive and is a 5 Amp VFD. It is housed in a panel mount (IP20) enclosure. It is a 480 VAC 3 phase VFD. It comes with a standard board.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD5P0A1AYNNNNN

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD5P0A1AYNNNNN
Weight7.00 lbs (3.18 kg)
Voltage480V AC
Ph3
Amps5
kW(Hp)2.2 (3.0)
FrameB
EnclosurePanel Mount - IP 20, NEMA/UL Type 1
Interface ModuleBlank Cover
TypeManual
w/BrakeYes
w/ResistorNo
RatingNot Filtered A & B Frames (Optional) C, D & E Frames
Network TypeNone
ControlStandard
Safe OffN/A
FeedbackNo Feedback - Enhanced Control

The 20AD5P0A1AYNNNNN PowerFlex 70 Adjustable Frequency AC Drive by Allen-Bradley is a digitally controlled AC Drive from the PowerFlex 70 family of enhanced drives that are designed to provide out-of-the-box performance in a wide range of applications. This drive offers slip compensation, a feature which allows for accurate speed control on loads without a feedback device, and it is capable of delivering 0.5% speed regulation across a 40:1 speed ratio. The 20AD5P0A1AYNNNNN has a drive output power rating of 3.0 Horsepower, and a nominal load rating of 5 Amps at 480 Volts AC input. It has a power factor of 0.98 and an operational efficiency of 97.5% at nominal load. The 20AD5P0A1AYNNNNN features fast acting current limiting that is programmable from 20 to 160% of the nominal rating, and it also features BUS voltage regulation for maximum acceleration and deceleration without tripping. It has excessive temperature control, which digitally monitors the drive temperature, thus preventing damage resulting from an excessive temperature, and it also has an automatic ground fault detection capability.

The 20AD5P0A1AYNNNNN features an internal dynamic brake transistor which provides a cheap means of switching regenerative energy, but it does not offer electromagnetic compatibility (EMC) line filtering. It is programmed for only Volt per Hertz control, and it utilizes a sinusoidal Pulse Width Modulated (PWM) signal for control. It offers users multiple stop modes, and the users can independently program the acceleration and deceleration times. The 20AD5P0A1AYNNNNN features an LED human-machine interface module with full digital control and multilingual text display and a simple 7 lines by 21 characters backlit display for the start-up, metering, programming, and troubleshooting data. The 20AD5P0A1AYNNNNN has an IP20 airtight and dust-tight industrial enclosure that is designed for conventional cabinet panel mounting, and this enclosure supports Zero Stacking with a 50 degrees Celsius maximum operating ambient temperature. The 20AD5P0A1AYNNNNN has a gross shipping weight of 3.60 kilograms, and aggregate mounting dimensions of 172.0 x 235.0 x 170.0 millimeters.

Revision Part #Also known as
20AD5P0A1AYNNNNN Ser A20AD5P0A1AYNNNNN/A, Series A, Rev A
Don't see your particular revision? Contact us now.