20AD5P0A3AYNACC1

The 20AD5P0A3AYNACC1 is a PowerFlex 70 AC drive engineered by Allen Bradley. It is usually installed as a part of a basic system that consists of an AC motor and a controller with an operator interface. The 20AD5P0A3AYNACC1 is used for 3-phase induction motor control. The 3-phase motor control system offers versatility and cost-effectiveness when compared to a single-phase or synchronous motor systems. The 20AD5P0A3AYNACC1 drive is equipped with an outstanding HMI that allows the users to adjust the operating speed, change the control method, and start and stop the motor. The interface can also be used to switch between automatic control and manual speed adjustment.

The Allen Bradley 20AD5P0A3AYNACC1 is a reliable device that is easily integrated into ControlNet industrial networks. Thanks to its optimized motor acceleration, stopping, and precise motor speed control functions, this industrial device can prolong the life of the motors. This drive has a capacity of 3 Horsepower (2.2 kW). The unit has one rare feature, which is the encoder interface option. This interface has 6 connectors that are used for internal power sourcing (5 Volts DC or 12 Volts DC), single channel or quadrature input A, and single channel or quadrature input B. Encoders connected to this interface must be the line driver type, quadrature or pulse, with the ability to supply a minimum of 10 mA per channel. The maximum input frequency of this interface is 250 kHz. The Allen Bradley 20AD5P0A3AYNACC1AC drive produces around 55 Watts of heat, so it is 97.5% efficient. The module is equipped with an IGBT brake system and with EMC filter. During the maintenance on the device, always disconnect the power supply from the drive and wait for at least 5 minutes until the capacitors inside of the drive are discharged.