20AD5P0A3AYYNRNN

The 20AD5P0A3AYYNRNN is a drive that can reliably and effectively run an AC motor at different speeds. It is a variable frequency drive. The drive requires 480 Volts AC voltage and the drive runs on 3-phase power. With this drive, users can control the speed, torque, and direction of an AC motor all at the same time. The AC voltage entering the drive is converted into DC voltage using a bridge rectifier. The drive runs on 5 Amps of current. The total power output of the drive is 3 Horsepower. This B frame body uses an enclosure for mounting purposes. The mounting enclosure has an IP20 rating and it is referred to as a NEMA/UL Type 1 enclosure. The 20AD5P0A3AYYNRNN supports line transients of up to 6000 Volts peak as per the IEEE standard. The control logic noise immunity can support transients of up to 1500 Volts peak. The AC drive has a power ride-thru of 15 milliseconds at a full load and a logic control ride thru of 0.5 seconds minimum.

The drive can trip for ground faults with phase to ground protection on the drive output and it can trip for short circuit with phase to phase protection on the drive output. On the front panel of the drive, a human-machine interface module is equipped for communicating with the drive. A backlit LCD and an integrated keypad are present as a human-machine interface module. The module supports 7 different languages and it is easy to understand and operate. The drive has a braking system installed and it uses a standard control procedure. The 20AD5P0A3AYYNRNN has been manufactured using the EMC directives and safety features. The drive has been certified with various standard certifications including the ABS, RCM, CE, and the EAC. It comes with built-in protective features to help simplify installation. The 20AD5P0A3AYYNRNN comes with ground fault protection during startup and verifies for reliability. It also comes with electronic motor overload protection which increases the motor life.