20AD8P0A0AYNANNN

The 20AD8P0A0AYNANNN is an adjustable frequency AC drive which has a current rating of 8 Amps. The power output of the drive is 3.7 kW or 5.0 Horsepower. The drive operates on an input voltage of 480 Volts AC. The drive must be operated in an environment where the temperature does not exceed 0 to 50 degrees Celsius. While mounting the drive, the users must ensure that the drive is mounted vertically and that the minimum clearances are maintained to allow airflow to the drive. The users must also consider the input supply conditions while connecting the drive to prevent any damage. The 20AD8P0A0AYNANNN drive can be operated on single-phase input power and generator input power. When the drive is operated on single-phase power. the output of the drive is reduced by 50%. For connecting the drive via a generator, the users will need to contact technical support for details to connect the drive properly.

The 20AD8P0A0AYNANNN drive has a power block which lets the users connect the power lines to the drive. The wires used for making the connections should have the minimum recommended gauge. It is important to make sure the wires have the sufficient current carrying capacity. The users must ground the system as per the instructions provided in the installation manual. The cables used for the connections must be short and preferably shielded. The users can also use unshielded cables but they need to be Thermoplastic heat-resistant nylon coated cables and they must be used in dry environments. These wires must not be used in wet areas. The typical acceptable length of the 20AD8P0A0AYNANNN’s motor lead is 30 meters.