20AD8P0A3ANYNNNNN

The Allen-Bradley 20AD8P0A3ANYNNNNN PowerFlex 710 Adjustable Frequency AC Drive is a variable frequency AC drive with a cost-effective HMI and a standard control option designed to provide exceptional torque and speed control in a variety of applications. It features an internal dynamic brake resistor which provides very high torque braking within a short duration and it also helps dissipate heat by converting excess kinetic energy to electrical energy for reuse, and it also features slip compensation which helps to deliver accurate motor control overload. The 20AD8P0A3ANYNNNNN has a 480 Volts AC nominal voltage rating with an acceptable range within 432 Volts AC and 528 Volts AC, and it has a net power rating of 3.7 Kilowatts (5.0 Horsepower) and a nominal current rating of 8.0 Amps. It has ground fault detection capability and it provides protection against ground faults and phase-to-phase fault at the output, using metal oxide varistors, designed to be field removable. The 20AD8P0A3ANYNNNNN has an inertia ride-through function, which allows for faultless and trip-less operation during irregular power loss, and it has under-voltage and overvoltage regulation as well as fast acting current limiting capacity for maximum operation. It is pre-configured for standard Volts per Hertz control which comes with a full custom capability and it is suitable for simple pump and fan applications.

The 20AD8P0A3ANYNNNNN provide 3-phase output voltage adjustable from 0 to the rated motor voltage and it is controlled by 0 to 400 Hertz of programmable output frequency. This offers 0.5% speed regulation over a 40:1 speed range by using slip compensation, and it provides manual frequency control with an accuracy rating within ±0.4% of the maximum output frequency. It offers Class 10 motor overload protection (with i2t algorithm), and a current overload capacity of 150% for 3 seconds. The 20AD8P0A3ANYNNNNN has an LCD human-machine interface module (HMI) with a 7-line by 21-character multilanguage descriptive text display and a full numeric control keypad that is used for start-up, metering, configuration, and troubleshooting. It comes with an IP20 rated enclosure, and it is designed for use within a 0 to 50 degrees Celsius temperature range and 5 to 95% non-condensing relative humidity condition. The 20AD8P0A3ANYNNNNN has approximate dimensions of 6.8 x 9.2 x 7.1 inches, and an approximate shipping weight of 8.0 kilograms.